January 30, 2016

How to Use Vinyl Off to Remove Sign and Vehicle Graphics

This article is to explain the Removal of Vinyl Graphics/Decals using Vinyl Off. Vinyl-Off is a safe ready to use product designed to assist in removing vinyl graphics from multiple substrates: metal, glass, canvas, FRP, painted surfaces, gel coat, fiberglass, etc. Used properly it will remove vinyl and 90-98% of the adhesive at the same time.
1、Test – Test – Test A little planning can save you a lot of effort!We also recommend starting with a small area and determining the best method of dwell time, amount of heat, and angle of pull.
2、Wipe Vinyl-Off onto ONLY the vinyl you want to remove using:Pad Sponge Foam Brush Fine Nap Roller Paper Towel, etc.
A little goes a long way. "Less is More
3、For best results, warm surfaces immediately before removal.Warm to the touch. Sun warmed on a warm day is perfect!
Non-Flammable and no toxic fumes! So you can use a heat gun or propane to warm the surface even indoors!
4、Allow a few minutes dwell time(very little waiting needed)Vinyl-Off penetrates the vinyl and attacks the adhesive behind it. You won’t usually see changes to the vinyl.
5、Lift an edge and pull.
The vinyl will come off in larger pieces because it has been rejuvenated. Most of the adhesive should come with the vinyl.
6、Remove any remaining adhesive by either re-applying Vinyl-Off or applying Adhesive –Off.
Wipe/Rinse off.

If installing new graphics after the removal,we recommend using isopropyl alcohol (IPA)to make sure that no oily residue from the other solvents is being left behind on the surface.

Posted by: annytinttool at 06:10 AM | No Comments | Add Comment
Post contains 268 words, total size 2 kb.

Green Silicone Blade Handle Squeegee Window Film Tool

The Green Silicone Blade Handle Squeegee is a perfect tint tool for bubbles and water removals while applying car window film. Making with plastic handle, the Squeegee is easy to grip and control. The soft and smooth edeg of the Silicone Blade gives car window film and vinyl more protection while tinting and wrapping. It is still a best application tool for cleaning up during the whole tinting.

click here to get more information about Handle Squeegee Auto Window Film Application Tool:http://www.tintingtool.com/squeegees/handle-squeegee-auto-window-film-application-tool-p-108941.html

Posted by: annytinttool at 06:04 AM | No Comments | Add Comment
Post contains 90 words, total size 1 kb.

January 29, 2016

Stainless Retractable Razor Blade Scraper Car Window Film Tool

This powerful Retractable Razor Blade Scraper uses single-edged razor blades. It is excellent for safety, grip strength, and maximum leverage where small blades are needed for film or other glass contaminant removal.
click here to get more Retractable Razor Blade Scraper information:

Posted by: annytinttool at 05:14 AM | No Comments | Add Comment
Post contains 52 words, total size 1 kb.

Easy Ways to Remove Car Window Tint

Car window tint is a translucent film that adheres to the inside of your vehicle's windows. Over time, the tint can become cracked or faded, or you may simply want to remove the film. Follow these strategies to remove the tint cleanly and with a minimum of hassle.


  • Work with one window at a time. Leave the car doors open for ventilation while working inside the vehicle. Fill a plastic spray bottle with ammonia, which acts as a powerful solvent to soften the tint adhesive. This is where it's important to keep the car ventilated: spray one tinted window thoroughly with ammonia, then cover the inside of the window with a plastic trash bag or plastic food wrap. Use a piece of tape to hold the plastic in place over the window.


  • Park the car in direct sunlight on a hot day and allow the treated window to bake in the heat for an hour. The heat and ammonia will loosen the tint adhesive, while the plastic trash bag or wrap over the window will hold in the hot air to speed up the process. If you can stand the smell of ammonia and want to move things along, plug a hair dryer into an extension cord (or use an adapter) and power the appliance from your vehicle's cigarette lighter, then blast the window with the hair dryer set on "high." This will help melt the adhesive securing the tint to your window.


  • Use your fingernails or the blade of a knife to peel the tint from one corner of the window. When you get a grip on the film, slowly peel it back and away from the window. The key word is "slowly." The idea is to peel off as much of the tint as possible in one piece so you minimize scraping with a razor blade.
    When removing tine from the back window, be especially careful when using sharp objects around the rear defroster wires. Cut just one wire, and you will ruin the defroster feature on the rear glass.
    Once the tine has been removed, spray Windex or another glass-cleaning product over any residual adhesive and wipe it away. This may take several attempts before all of the sticky adhesive is removed.

 For those who want to tint car windows, you first need to buy cheap auto tinting tools from TintingTool.com.

Posted by: annytinttool at 05:13 AM | No Comments | Add Comment
Post contains 404 words, total size 3 kb.

January 26, 2016

Orange Micro Fiber Towel Window Dryer

The Microfiber Towel is absorbent and lint-free for cleaning and detailing away smudges, dust, oil and grease from virtually any surface. It is soft and durable to use. Tinter can also use this towel for hard card squeegee wrapping while bumpping water and bubbles.
Tinting Lint Free Towel click here to get more information:http://www.TintingTool.com/cleaning-pads-and-cloths/

Posted by: annytinttool at 02:47 AM | No Comments | Add Comment
Post contains 60 words, total size 1 kb.

Effects of car tinting

Car Tinting is an attractive and cost effective car enhancement product that offers much more than just good looks.High qulity window film comes in a full metal or matching carbon equivalent for those windows that have radio antenna in the rear screen.It can reduces the incidence of skin cancers, and sun damage to the eyes.
In a vehicle accident, window film holds broken glass together,reducing the risk of injury to occupants.
It can also protect seat fabrics against facing from the sun. Improves re-sale value.

Posted by: annytinttool at 02:45 AM | No Comments | Add Comment
Post contains 89 words, total size 1 kb.

4" Grey Universal Bondo Card Auto Film Tint Tool

4" Grey Universal Bondo Card4" Grey Universal Bondo Card Auto Film Tint Tool is a multiple auto vinyl wraps and film tints tool. It can be used as a window film installation squeegee to remove water. Tinters can also wrap this Bondo Card in a soft microfiber cloths or Super Pre Towel to bump edges dry when wrapping vinyl graphics, vehicle wraps and paint protection films. The unique firm flex gives tinters a easier grip and control. It can be said that 4" Grey Universal Bondo Card is not only a mini window tinting hard card squeegee, but a vinyl wrapping bump card, saving your money.
click here to get more information:http://www.tintingtool.com/squeegees/4quot-grey-universal-bondo-card-auto-film-tint-tool-p-109647.html

Posted by: annytinttool at 02:37 AM | No Comments | Add Comment
Post contains 121 words, total size 1 kb.

January 22, 2016

Retractable Razor Blade Scraper

With a mini design, this plastic Retractable Razor Blade Scraper has a light weight, which making it extremely easy to use, especially efficient at removing contaminants. Tinter can adjust the retractable razor blade when cleaning. It is a absolutely essential tool for all flat glass installers when triming and tuning.
Plastic Retractable Razor Blade Scraper for Glass Adhesive Removing,click here to get more information:http://www.tintingtool.com/scrapers-and-blades/plastic-retractable-razor-blade-scraper-for-glass-adhesive-removing-p-108287.html

Posted by: annytinttool at 08:18 AM | No Comments | Add Comment
Post contains 68 words, total size 1 kb.

The materials of tinting tools

When we tinting car window film by ourselves,someone will worry that whether the quality of the tinting tool better or not, What are the materials of these tools? And will they be harmful for us?Now I am telling you the answers. Most of these tools are made of plactics and stainless steel,and they are all with high-quality.Most of them are resisting the heat up to 300℃。What's more,every tinting tool is light to handle,and it is convenience to tint the car.The materials of the tools donot have
any dangerous substance that you needn't worry to use them .
Red Soft Quick Foot Squeegee High Tempreture Resistance Tinting Tool,Find more Cleaning Pads and Cloths here:http://www.tintingtool.com/squeegees/red-soft-quick-foot-squeegee-high-tempreture-resistance-tinting-tool-p-109655.html


Posted by: annytinttool at 08:16 AM | No Comments | Add Comment
Post contains 124 words, total size 1 kb.

<< Page 1 of 1 >>
27kb generated in CPU 0.03, elapsed 0.0469 seconds.
32 queries taking 0.0269 seconds, 74 records returned.
Powered by Minx 1.1.6c-pink.