This article is to explain the Removal of Vinyl Graphics/Decals using Vinyl Off. Vinyl-Off is a safe ready to use product designed to assist in removing vinyl graphics from multiple substrates: metal, glass, canvas, FRP, painted surfaces, gel coat, fiberglass, etc. Used properly it will remove vinyl and 90-98% of the adhesive at the same time.
1、Test – Test – Test A little planning can save you a lot of effort!We also recommend starting with a small area and determining the best method of dwell time, amount of heat, and angle of pull.
2、Wipe Vinyl-Off onto ONLY the vinyl you want to remove using:Pad Sponge Foam Brush Fine Nap Roller Paper Towel, etc.
A little goes a long way. "Less is More
3、For best results, warm surfaces immediately before removal.Warm to the touch. Sun warmed on a warm day is perfect!
Non-Flammable and no toxic fumes! So you can use a heat gun or propane to warm the surface even indoors!
4、Allow a few minutes dwell time(very little waiting needed)Vinyl-Off penetrates the vinyl and attacks the adhesive behind it. You won’t usually see changes to the vinyl.
5、Lift an edge and pull.
The vinyl will come off in larger pieces because it has been rejuvenated. Most of the adhesive should come with the vinyl.
6、Remove any remaining adhesive by either re-applying Vinyl-Off or applying Adhesive –Off.
7、Wipe/Rinse off.

Posted by: annytinttool at 06:10 AM | Comments (1) | Add Comment
Post contains 268 words, total size 2 kb.